Evaluating the Effect of Cooling Rate and Organogelator Concentration on the Textural Properties of Sesame oil Oleogels and Comparison with Animal Fat

Authors
Nafiseh Soltanizadeh
Sayed Amir Hossein Goli
Isfahan University of Technology
Abstract
The aim of present study was to evaluate the effect of organogelator concentrations and cooling rate on textural properties of beeswax and ethylcellulose oleogels to find a similar products with animal fat. For this purpose, oleogels were produced from sesame oil along with ethylcellulose and beeswax organogelator in 5, 7.5 and 10% concentrations. Then, they were cooled at 4 and 25 oC. The penetration and back extrusion forces of the oleogels were evaluated and compared to flank and shank animal fat. Results indicated that with enhancement of organogelator concentration, the hardness of oleogels increased. The cooling at 4 oC in comparison with 25 oC could increase the penetration force of oleogels and decrease the back extrusion force. Rheological properties were also affected by the rate of cooling and organogelator concentration. The comparison of animal fat with oleogels showed that the amounts of loss and storage modulus in animal fat were greater than that of oleogels, and even had a lower phase angle and greater relative elasticity than the oleogels. Although the oleogels did not have the same textural properties as the animal fat, only 10% organogelator-containing oleogels had a back extrusion force similar to that of animal fat.
Keywords
Oleogels
Beeswax
Ethyl cellulose
Rheology

Subjects