Investigation on Warming Capacity of Zeolite 3A and Water Reaction in Self-heating Cylinder to Warm up Beverages

Authors
1 Department of Food Science and Technology, Tarbiat Modares University, Tehran, Iran.
2 Veterinary Department, Semnan University, Semnan, Iran.
Abstract
In recent years, changes in lifestyle and the need to provide and access food and beverages more easily and quickly have led to changes in food packaging. One of these changes is the advent of self-heating packaging, which allows the consumer to access hot food and drink in any place using various exothermic reactions, without the use of heating devices. In this study, a cylinder made of 316l stainless steel was used to heat 200 ml tea and low-fat pasteurized milk by using zeolite 3A and water reaction. As a result, the temperature inside the cylinder for the ratio of 9:1, after 95 seconds increased from 30.8 °C to 100.3 °C, and this amount of heat led to an increase in the temperature of tea from 26.8 °C to 29.3 °C for 488 seconds. Also, after 841 seconds, the milk temperature increased from 23.9 °C to 27.3 °C. Then, the heating of the cylinder containing this reaction inside the mentioned beverages was simulated and modeled using COMSOL Multiphysics software. It has been determined that the experimental data and simulated models were almost fitted.
Keywords

Subjects


[1] Bodbodak, S. and Rafiee, Z. (2016). Recent trends in active packaging in fruits and vegetables. In Eco-friendly technology for postharvest produce quality, Academic Press: 77-125.
[2] Majid, I., Thakur, M. and Nanda, V. (2018). Innovative and Safe Packaging Technologies for Food and Beverages: Updated Review. In Innovations in Technologies for Fermented Food and Beverage Industries, Springer International Publishing: 257–287.
[3] Majid, I., Nayik, G.A., Dar, S.M. and Nanda, V. (2016). Novel food packaging technologies: Innovations and future prospective. Journal of the Saudi Society of Agricultural Sciences 17(4): 454-462.
[4] Daintith, J. (ed.). (2008). A dictionary of chemistry. OUP Oxford.
[5] Bohra, B., Chavan, R., Gawit, N., Ahire, R., Kale, R. and Kapse, N. (2015). An Eco-friendly and Reusable Heat Source for Self-Heating Food Packaging. International Journal of Engineering Research and Technology (IJERT) 4(5): 365–368.
[6] Microsoft Corporation. (2019). Microsoft Excel, Available at: https://office.microsoft.com/excel
[7] Ho, S.H., Rahman, M.M. and Sunol, A.K. (2010). Analysis of thermal response of a food self-heating system. Applied thermal engineering 30(14-15): 2109-2115.
[8] COMSOL AB. (2019). COMSOL Multiphysics® v. 5.5. Stockholm, Sweden. Available at: https://www.comsol.com
[9] Comsol AB. (2018). Comsol Multiphysics-Heat Transfer Module, User’s Guide, Version 5.4.
[10] Bahrami, M. (2009). Steady conduction heat transfer, ENSC 388 (F09). Retrieved July 22, 2021, from http://www.sfu.ca/~mbahrami/ENSC%20388/Notes/Staedy%20Conduction%20Heat%20Transfer.pdf.
[11] Maier-Laxhuber, P., Schmidt, R. and Binnen, M., Zeo-Tech GmbH. (2009). Selbsterwärmendes Heizelement mit Sorptionsmittel. DE102008015677A1.
[12] Arnold, U., (2017). Transportable device for heating foodstuffs, and a transportable heating element. U.S. Patent 9,851,125.
[13] Asghar, M. (2021). Why does milk boil faster than water? Retrieved August 19, 2021, from https://thewholeportion.com/why-does-milk-boil-faster-than-water/
[14] Gabruś, E., Nastaj, J., Tabero, P. and Aleksandrzak, T. (2015) Experimental studies on 3A and 4A zeolite molecular sieves regeneration in TSA process: Aliphatic alcohols dewatering–water desorption. Chemical Engineering Journal 259: 232-242.
[15] Gaulke, M., Guschin, V., Knapp, S., Pappert, S. and Eckl, W. (2016). A unified kinetic model for adsorption and desorption–Applied to water on zeolite. Microporous and Mesoporous Materials 233: 39-43.