Volume 13, Issue 51 (2016)
FSCT 2016, 13(51): 43-50 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Askari Ardeh ٍ, Basati Z, Salehi N. Breakage grains percent obtained from different drying methods some common paddy varieties in Guilan province. FSCT 2016; 13 (51) :43-50
URL: http://fsct.modares.ac.ir/article-7-3276-en.html
URL: http://fsct.modares.ac.ir/article-7-3276-en.html
Abstract: (8581 Views)
At this study, effect of paddy drying method with three levels (shadow drying, sun drying and oven drying), paddy grain moisture content at four levels (8, 10, 12, 14 w.b.%) and common paddy varieties in Guilan province at three levels (Hasani, Hashemi and Alikazemi) were investigated on broken grains percent duo to milling process. The results that breakage percent of grains was least at tests with shad drying method. The mean highest breakage percent of grains at husking stage (14.061%) was obtained at tests with Hashemi variety and oven drying method. The mean least breakage percent of grains at husking stage (5.351%) was obtained at tests with Alikazemi variety and shad drying method. With increasing of grain moisture content of milling from 8 to 14 w.b. %, breakage percent of grains at husking and whitening stages were decreased from 11.616 % to 7.717 % and 21.025 to 12.841%, respectively. The mean highest (21.340%) and least (13.841%) breakage of grain whitening obtained at tests with sun drying and shad drying methods, respectively. The mean highest (20.539) and least (14.150%) breakage percent of grain whitening obtained at tests with Hasani and Hashemi and Alikazemi varieties, respectively.
Received: 2014/05/6 | Accepted: 2015/03/7 | Published: 2016/02/20
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |