Volume 17, Issue 106 (2020)                   FSCT 2020, 17(106): 33-45 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mialni E, Shahidi F, ansarifar E, khalilian M, sepahi F. Possibility of applying Oleaster in production of extruded snack and evaluation of product characteristics. FSCT 2020; 17 (106) :33-45
URL: http://fsct.modares.ac.ir/article-7-32436-en.html
1- Assistant professor in ACECR , e_milani81@yahoo.com
2- Professor
4- HH
5- student
Abstract:   (776 Views)
Snack foods contain main parts of food habit among people in the world. Recently the high rate of consumption and variety of extruded snacks is proven to increase the attention to nutritional quality besides keeping desired acceptability of products. In this study, based on central composite design the effect of independent variables consist of the whole Oleaster  powder (5- 15%), moisture content (12-20%), screw speed (120-180 RPM), were investigated on the physicochemical, textural and color of extrudates based on corn- wheat grit. results showed that, Increasing Oleaster content caused an increase in the density, hardness and solubility. Whereas, Increase screw rate and oleaster content simultaneously leaded to a lower density. In low amount of moisture content, improvement of oleaster content didn’t significant effect on hardness. However by boosting recent factors gradually, the hardness of products increased dramatically. Moisture content and screw speed had absolute effect on lightness of extrudates. Meanwhile improvement of oleaster content caused a decrease in lightness. Optimum condition was determined to be the feed moisture content (13.87%), oleaster content (5%) and screw speed rate (166.7 rpm).
Full-Text [PDF 957 kb]   (442 Downloads)    
Article Type: Original Research | Subject: Enriching food
Received: 2019/04/29 | Accepted: 2020/06/9 | Published: 2020/11/30

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.